Hardwood Floor Refinishing in Toronto & the GTA
If your floor has enough wood left to sand, repairs and your chosen finish can bring it back to life.
- Insured
- WSIB coverage
- Free, itemized quotes
Tell us what needs fixing
Quotes are free, with no payment needed.
Prefer to talk? Call (365) 360-7237 or text (365) 360-7237.
- Insured and WSIB coverage
- A clear, itemized price before any work starts
- Text a photo for a faster quote
- (365) 360-7237
Text us a photo of the job
Take two or three photos, one up close and one from a few steps back. Text them to (365) 360-7237 with a quick note about what’s going on, and we’ll get back to you with next steps.
- 1A close-up of the problem
- 2A wider shot of the whole area
- 3A quick note on what happened and when
How hardwood floor refinishing works
Worn wood can look new again when the floor still has enough wood left to sand.
- Once the room is clear, we cover vents and doorways to keep dust in.
- Repairs come first: loose boards, wide gaps and squeaks we can reach.
- Sanding takes off the old finish and brings the floor back to bare wood, edges included.
- Vacuuming between steps keeps dust out of the new finish.
- Stain goes on if you want a new colour, followed by the finish coats.
- At the end, we walk the floor with you and explain when furniture can return.
Dust control
Sanding makes fine dust, so doorways and vents stay covered and we vacuum as we go. Ask us about the equipment we use and how much dust to expect.
Stain colours and sheens
Natural, light and dark stains all change how the grain looks. Matte, satin and semi-gloss finishes change the shine, and a sample patch shows the colour in your own light.
Water-based or oil-based finish
Water-based finishes dry faster and stay clearer, while oil-based finishes add a warmer, amber tone. Your quote names the finish we plan to use and how long it needs to cure.
Repairs before refinishing
We can replace damaged boards with matching wood before sanding, and fill gaps where it makes sense. A board too thin to sand needs replacing rather than refinishing.
How long rooms are out of use
Rooms stay out of use while we sand and while each coat dries. Furniture and rugs wait longer, until the finish has cured, and your quote sets out how long each room stays closed.
How pricing works
Every quote we send is free and itemized.
Text us 2–3 photos for a faster quote.
What changes the price
- Floor area
- Board repairs and gaps
- Stain colour
- Finish type
Floor wear, board repairs and finish choice affect your quote. Your quote lists any replacement boards separately. You can compare refinishing against a new floor.
Your quote lists every item before work starts.
What's included
- We take a proper look at the problem before recommending anything.
- Your written quote itemizes the work and the materials.
- At the end, we go over the finished job with you.
Talk to us about hardwood floor refinishing
Call or text (365) 360-7237. Photos help us see the problem.
Why Hazelake for hardwood refinishing?
- Hazelake is insured and has WSIB coverage.
- You see which parts of the job drive the price.
- We tell you what can stay, what needs replacing, and why.
- If we find extra work, we explain it and price it before going ahead.
More flooring services
Related services
Loose baseboards or split trim along the refinished floor? Baseboard and trim installation can replace them.
Fresh colour on the walls and trim as well? Interior painting can follow once the floor finish has cured.
Service areas
All flooring servicesYour questions, answered
Can you sand my engineered wood floor?
Some engineered boards are too thin to sand again. We check yours before recommending refinishing.
Will sanding take out every dark mark?
A deep stain may run right through the wood. We’ll show you when a board repair makes more sense.
Will a new finish stop my floorboards moving?
No, loose boards still need attention before refinishing. Your finish will look better on a floor that stays firm.
Can you match a new stain to my older floor?
Age and light can change how your wood takes a stain. We’ll discuss the colour and test a suitable sample.
When can I put furniture back after refinishing?
Your finish needs time to cure. We’ll give you the product’s instructions for furniture and rugs when the job is done.
Can you fix squeaky floorboards?
Often, yes, when we can reach the loose board from above. The fix depends on what is causing the squeak, so we check before sanding starts.
Ready to talk through your options? Call or text us
Call or text (365) 360-7237. Photos help us see the problem.